Homepage » DLL Q & A

Fltmgr.sys 0x0000003b BSOD W7 Crash

Download Now


FAIZ HOMAIDHI asked on March 12, 2013. Status: Answered & Closed.

Fltmgr.sys 0x0000003b BSOD W7 Crash

» I get this crash all the time with bluescreen 0x0000003b of fltmgr.sys, can anybody help me with this?

Best Answer

» If a driver is listed by name within the bug check message, disable or remove that driver. Disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence and the system partition is formatted with NTFS file system, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you must start the computer by using the Recovery Console to access the file.

You can also disable memory caching of the BIOS might to try to resolve the error. You should also run hardware diagnostics, especially the memory scanner, that the system manufacturer supplies. The error that generates this message can occur after the first restart during Windows Setup, or after Setup is finished. A possible cause of the error is lack of disk space for installation and system BIOS incompatibilities.

For problems during Windows installation that are associated with lack of disk space, reduce the number of files on the target hard disk drive. Check for and delete any temporary files that you do not have to have, Internet cache files, application backup files, and.chkfiles that contain saved file fragments from disk scans. You can also use another hard disk drive with more free space for the installation. You can resolve BIOS problems by upgrading the system BIOS version.

As for other kinds of blue screen of death, the causes can be a virus/Trojan infection(Trojan:Win32/Danginex), all you have to do first is to run an antivirus scan, and then use DLL Suite to fine tune your system and clean the aftermath of virus removal. The associated dll file errors will be fixed at the same time this way.

WILLIAM MCNEASE replied on March 18, 2013

All Answers:

  1. JEFFREY DROLET replied on March 12, 2013: » I would suggest you to try the steps mentioned from the link, which would help us to resolving stop (blue screen) errors in Windows 7.

    Important: While performing check disk on the hard drive if any bad sectors are found on the hard drive when check disk tries to repair that sector if any data available on that might be lost.

  2. FAIZ HOMAIDHI replied on March 13, 2013: » It occurs anytime you restart the PC after a while running. (no specific time frame).Windows8 upgrade was installed, but it happened before already.Not running in Safe mode.

  3. BONNIE HARTMANN replied on March 14, 2013: » I also have the same issue, I would start up my Samsung Series 7 gamer laptop just after upgrading to Windows 8 and since then every time I start up my laptop it will blue screen after about 30 seconds or a few minutes longer. Now I will try to boot into safe mode now to rule out any driver/ issue. I have also recently upgraded my HDD to an SSD.

  4. ROGER WARNOCK replied on March 15, 2013: » Method 1: I would suggest you to try updating the drivers for the Video card and check if that helps. Follow the steps provided below to update the drivers.

    a) Drag the mouse to bottom left corner and right-click on the 'Start icon'.

    b) Select 'Device manager'

    c) In Device Manager, locate the device you want to update, and then double-click the device name.

    d) Click the 'Driver' tab, and then click 'Update Driver' and follow the instructions

    Method 2: If the issue persists then set your computer in Clean Boot state and check if the same issue occurs.

    By setting your system in clean boot state helps in identifying if any third party applications or startup items are causing the issue.

  5. MARGARET SONNEK replied on March 16, 2013: » Please update or remove these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager. Please use the following instructions to locate the most current drivers: Search Google for the name of the driver > compare the Google results with what's installed on your system to figure out which device/program it belongs to > visit the web site of the manufacturer of the hardware/program to get the latest drivers for Windows 7

DLL Q & A You Might Like:

  1. Bluescreen 0x0000001e ffffffff When Looking For Files »
  2. Bluescreens And Internet Connection Failure »
  3. Cannot Create New drive And Shrink C Drive As Desired »
  4. Can't Run Any Anti-virus Softwar After Infection »
  5. How To Copy IOPORT.SYS DRIVER »
  6. Windows 7 Freezes Even After Applying Hotfix KB2265716 »
  7. Store To Ram (STR) Sleep Mode S3 Failure With SP1 »